---
title: "📋 SecuRooms Drive: Rollout and Installation"
url: "https://support.ftapi.com/en/article/securooms-drive-rollout-und-installation"
language: "en"
last_updated: "2026-09-18T08:08:14.710Z"
---

# 📋 SecuRooms Drive: Rollout and Installation

This article informs administrators about the technical requirements for the FTAPI SecuRooms Drive and provides a step-by-step guide for manual installation as well as automated distribution (MSI) within the corporate network.

* * *

**You can download the latest version of SecuRooms Drive at any time using the following link:** [**https://software.ftapi.com/ftapi/securoomsdrive/latest**](https://software.ftapi.com/ftapi/securoomsdrive/latest)  
Please make sure that the installation and user requirements listed below are met.

* * *

## Prerequisites for installation

To ensure a smooth installation, please check in advance whether you have the necessary roles and rights, the technical requirements are met, and the network is configured correctly.

### Roles & rights

Depending on the type of installation, you require different permissions on the target system:

| Installation type | Required rights |
| --- | --- |
| Standard installation | Local administrator rights |
| Enterprise rollout | Domain administrator or SCCM/Intune permission |

### Technical requirements

The following system requirements must be met on the end devices:

| Requirement | Details |
| --- | --- |
| Operating system | Windows 11 |
| Architecture | x86\_64 (64-bit) |
| Runtime | Microsoft Edge WebView2 Runtime (installed automatically) |
| Disk space | At least 200 MB free hard disk space |
| Memory | At least 4 GB RAM recommended |

> **Please note**: SecuRooms Drive does not support Windows Terminal Servers. Full functionality is not guaranteed when installed or used in terminal server environments.

### Network

Your network must be configured for communication with the FTAPI server as follows:

-   **Access:** Access to your FTAPI server must be guaranteed (default: `https://[your-instance].ftapi.com`).
-   **Ports:** Port 443 (HTTPS) must be opened in the firewall.
-   **Proxy:** If applicable, proxy configuration according to your corporate policies.

SecuRooms Drive picks up the machine's proxy settings automatically from the Windows internet settings. In most cases no configuration is required. To set a specific proxy machine-wide instead, see the article [📋 SecuRooms Drive: Proxy settings](https://support.ftapi.com/en/article/-securooms-drive-proxy-einstellungen).

### FTAPI system requirement: version 4.68.0 or higher

SecuRooms Drive version 1.1.0 requires FTAPI version 4.68.0 or higher. All future SecuRooms Drive versions require this or a higher version. 

If you use FTAPI in the cloud, your instance is updated automatically and already meets the requirement. If you run FTAPI on-premises, update your instance to version 4.68.0 or higher before you roll out SecuRooms Drive 1.1.0 to the workstations.

* * *

## Prerequisites for SecuRooms Drive users

Every user for whom the SecuRooms Drive is rolled out must meet the following criteria for a successful login:

-   A **user account on the SecuRooms server** must exist.
-   A **valid FTAPI SecuRooms license** must be available.
-   The user must be in a group with the **group permission "Access to SecuRooms Drive"**.

![](https://cdn-assets.productfruits.com/c7387713-33d0-4dc5-8446-934d58a95d26)

* * *

## Software acquisition

You can download the latest version of SecuRooms Drive at any time using the following link: [**https://software.ftapi.com/ftapi/securoomsdrive/latest**](https://software.ftapi.com/ftapi/securoomsdrive/latest)

* * *

## Automated installation (Enterprise rollout)

SecuRooms Drive supports automated installation for corporate environments. The installation is script-based via MSI and can be integrated into deployment tools and group policies.

### SERVER\_URL parameter

The `SERVER_URL` parameter defines the central server address to which all clients connect. This saves end users from having to manually enter the server address during the first start.

**Example MSI installation via command line:**

```plaintext
msiexec /i SecuRooms_Drive-latest.msi /qn SERVER_URL="https://[your_instance].ftapi.com"
```

* * *

## Technical details

For administrators, the following storage locations and registry entries are relevant for troubleshooting or verification.

### Storage locations

| Data | Windows path |
| --- | --- |
| Database | `\AppData\Roaming\com.ftapi.securooms-drive.app` |
| Logs | `\AppData\Local\SecuRooms Drive\Logs` |

### Registry entries

| Path | Value | Description |
| --- | --- | --- |
| `HKLM\Software\FTAPI\SecuRooms Drive\InstallDir` | Installation path | Directory of the installation |
| `HKLM\Software\FTAPI\SecuRooms Drive\ServerURL` | Server URL | Configured server address |
| ProxyURL | REG\_SZ | The proxy SecuRooms Drive should use, in the format `http://host:port` or `https://host:port`. This setting takes priority over the internet and proxy settings configured in Windows. See [📋 SecuRooms Drive: Proxy settings](https://support.ftapi.com/en/article/-securooms-drive-proxy-einstellungen). |

## **Related articles**

> #### [**❓ SecuRooms Drive: Overview & functions**](https://support.ftapi.com/de/article/securooms-drive-uberblick-funktionen)
> 
> #### [**📋 SecuRooms Drive: User guide**](https://support.ftapi.com/de/article/securooms-drive-benutzeranleitung)  
> [📋 SecuRooms Drive: Proxy settings](https://support.ftapi.com/en/article/-securooms-drive-proxy-einstellungen)